Amana Dryer Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 9 codes covered.
Shop Amana Dryer parts at RepairClinic
- AF — Restricted airflow: the lint screen or vent is clogged, or the vent is crushed, kinked or has too many turns. The dryer keeps running while…
- E1 — Thermistor failure (plain E-code on electronic models): a temperature sensor is reading open, shorted or out of range.
- F3 E1 — Exhaust thermistor fault: the sensor that reads exhaust temperature has failed or is out of range (definition from Whirlpool-platform…
- F3 E2 — Moisture sensor fault: sensor-dry cycles may end too early or run too long because the sensor bars are not reading moisture correctly.
- F4 E3 — Restricted airflow (the F-code form of AF): the lint screen or vent is clogged, or the vent is crushed, kinked or has too many turns. The…
- F4 E4 — Low or missing line voltage (the F-code form of L2 on display models): one leg of the 240-volt supply is low or dead, so the dryer runs but…
- L2 — Low or no line voltage: there may be a problem with the home power supply, keeping the dryer's heater from turning on. The dryer continues…
- Loc — The Control Lock is enabled, so the dryer controls are locked.
- PF — Power failure: the drying cycle has been interrupted by a power failure.