Bosch Oven E000 Error Code
What the E000 code means
Wrong module combination on 300, 500 and 800 Series built-in wall ovens: the control module and user interface are mismatched, usually after a board replacement, and no operation is possible until the option code is set correctly.
Likely causes
- control module and user interface mismatched
- option code not set after replacing a board
- wrong replacement board fitted
How to fix it — step by step
- Turn the oven off at the breaker for 30 seconds and restore power
- If the code appeared after a repair, tell the installer - the option code must be set in service mode
- Book a technician if the code persists; board configuration is not a homeowner job
Parts that commonly fix the E000 code
- control module - Shop at RepairClinic
- user interface - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.