Chevrolet Silverado 1500 Burning oil

What this problem usually means

Silverado V8s with Active Fuel Management are known for excessive oil consumption, particularly 2007-2009 and 2014-2015 trucks and 2019-2022 5.3L engines, where consumption can reach a quart or more between changes. Left unchecked it starves lifters and accelerates the AFM lifter problems these engines are known for.

Likely causes

  1. AFM-related piston ring and oil control issues on cylinder-deactivation V8s
  2. Stuck or failed PCV valve pulling oil into the intake
  3. Valve cover/baffle design on earlier AFM engines letting oil mist into the intake
  4. External leaks mistaken for consumption (confirm there is no drip)

How to fix it — step by step

  1. Start a consumption log: fill to the mark, note the mileage, and check the dipstick every 500 miles to measure the actual rate
  2. Rule out external leaks first by inspecting the valve covers, oil pan and rear of the engine
  3. Replace the inexpensive PCV valve and re-test consumption before assuming rings
  4. Ask a dealer whether any special coverage or updated valve cover applies to your engine; documented heavy consumption may qualify for repair help

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Chevrolet Silverado 1500 problems

See all Chevrolet Silverado 1500 codes & guides →