Ford F-150 Engine misfiring
What this problem usually means
RepairPal lists ignition coil failure due to excessive spark plug gap as a top F-150 problem: as plugs wear and the gap widens, the coils work harder until they fail and the engine misfires. On 5.4L Triton V8 trucks there is a more dramatic version covered by a Ford TSB, where a spark plug can blow out of the cylinder head entirely, stripping its threads.
Likely causes
- Ignition coil failure caused by worn, wide-gapped spark plugs
- Worn or fouled spark plugs
- Spark plug ejected from the cylinder head on 5.4L Triton engines (TSB issue)
- Failed coil boot or connector letting spark arc to ground
How to fix it — step by step
- Scan for misfire codes (P0300-P0308) to identify the cylinder involved
- Swap the suspect coil with one from another cylinder and see whether the misfire moves with it; if it does, the coil is bad
- Remove and inspect the plugs; replace the full set if the gaps have widened beyond spec, since worn plugs kill new coils
- If a plug has blown out of a 5.4L head, do not just thread in a new plug; the head needs the Ford-approved thread insert repair or head replacement
- On 5.4L trucks, follow the special removal procedure for seized two-piece plugs rather than forcing them, as they can break off in the head
Parts that commonly fix it
- spark plugs - Shop at Amazon
- ignition coils - Shop at Amazon
- coil boots - Shop at Amazon
- spark plug thread insert kit - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.