Hayward Pool heater LO Error Code

What the LO code means

On Hayward Universal H-Series gas pool heaters, LO means the limit string is open - the water pressure switch, vent pressure switch or temperature limit switch has opened and shut the heater down. It is not a low-temperature reading.

Likely causes

  1. low or no water flow - pump off, dirty filter or closed valves
  2. failed water pressure switch
  3. vent pressure switch fault
  4. temperature limit switch open from overheating

How to fix it — step by step

  1. Note that LO with the pump off can be normal - start the pump first
  2. Clean or backwash the filter and empty skimmer and pump baskets
  3. Open all valves to the heater fully and confirm strong flow at the returns
  4. Let the heater auto-restart about 2 minutes after flow is restored
  5. If LO persists with proven good flow, call a pool/spa technician - never bypass a limit switch

Parts that commonly fix the LO code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Hayward pool heater error codes

See all Hayward pool heater codes & guides →