LG Washer IE Error Code

What the IE code means

Inlet error: the washer did not fill with enough water in the time allowed, so the cycle stops.

Likely causes

  1. Water taps not fully open or a water outage
  2. Inlet hose kinked, bent or frozen
  3. Clogged inlet filter screens in the supply hoses
  4. Low household water pressure
  5. Drain hose installed too low or submerged, siphoning water out as it fills

How to fix it — step by step

  1. Fully open both hot and cold water taps and check water runs in the house
  2. Straighten any kinks in the inlet hoses and make sure they are connected tightly
  3. Turn off the taps, disconnect the hoses and clean the small inlet filter screens with a toothbrush
  4. If hoses or taps are frozen, thaw them with warm (not boiling) water or a warm towel
  5. Make sure the drain hose end is not submerged and is secured at the correct height, then restart the cycle

Parts that commonly fix the IE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related LG washer error codes

See all LG washer codes & guides →