Maytag Washer HC Error Code

What the HC code means

The hot and cold inlet hoses have been installed reversed: the cold hose is on the hot inlet and the hot hose is on the cold inlet. The code appears at the end of the wash cycle.

Likely causes

  1. Hot and cold hoses swapped at installation
  2. Hoses moved and reconnected incorrectly

How to fix it — step by step

  1. Turn off the water supply
  2. Swap the hoses so hot connects to hot and cold to cold
  3. Turn the water back on and check for leaks
  4. Run another cycle to verify the code is gone

Parts that commonly fix the HC code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Maytag washer error codes

See all Maytag washer codes & guides →