Samsung Dishwasher OC Error Code
What the OC code means
Over-level water error: there is more water in the dishwasher than there should be, often linked to a drainage problem. It is also shown as 0C or oE on some models.
Likely causes
- Drain hose, filter or sump blocked so water cannot leave
- Too much detergent or wrong detergent creating excess foam
- Water inlet valve not closing fully
- Level sensor fault
How to fix it — step by step
- Check for excess foam and confirm only dishwasher detergent was used
- Clean the filter and check the drain hose for kinks
- Cancel the cycle to drain and watch whether the water level drops
- If it overfills again, turn off the water supply and request service
Parts that commonly fix the OC code
- water inlet valve - Shop at RepairClinic
- drain pump - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.