Speed Queen Washer Er dr
What this problem usually means
Drain error on Speed Queen front-load washers: water is still in the washer at the end of the cycle, per Speed Queen's front-load user guide (FLW1548C). The control also enters error mode if water is not below empty after about 2 minutes of draining on electronic models.
Likely causes
- Blocked drain hose or standpipe
- Clogged foreign-object trap in the pump
- Kinked drain hose
- Failed drain pump
How to fix it — step by step
- Check the drain hose and the standpipe or floor drain for blockages
- Clean the pump foreign-object trap as your manual shows
- Straighten any kink in the drain hose
- Unplug the washer briefly to clear the code and restart; call for service if Er dr returns
Parts that commonly fix it
- drain pump - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.