Whirlpool Oven F3 Error Code
What the F3 code means
Open oven temperature sensor circuit on older 2-digit-code ovens. On newer ovens the same fault is F3 E0.
Likely causes
- Failed oven temperature sensor (RTD) - a good one reads about 1,080 ohms at room temperature
- Corroded sensor connector behind the back panel
- Pinched or broken sensor harness
How to fix it — step by step
- Switch the breaker off for 1 minute, restore it, and try Bake
- Note whether preheat was slow or uneven before the code - a classic sensor warning sign
- If F3 returns, schedule service to test and replace the sensor
Parts that commonly fix the F3 code
- oven temperature sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.