Whirlpool Washer LF Error Code

What the LF code means

Long fill: the washer is taking too long to fill with water. This is the top-load display for the same fault as F8 E1.

Likely causes

  1. Faucets not turned on or not fully open
  2. Kinked or clogged inlet hoses/screens
  3. Drain hose installed too deep causing siphoning
  4. Low water pressure

How to fix it — step by step

  1. Open both hot and cold faucets completely
  2. Check inlet hoses for kinks and clean the inlet screens
  3. Check the drain hose is not pushed too far into the standpipe
  4. Press Pause/Cancel to clear and restart the cycle

Parts that commonly fix the LF code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Whirlpool washer error codes

See all Whirlpool washer codes & guides →