York Furnace Rapid amber flash

What this problem usually means

Flame sense current is below 1.5 microamps on York furnaces with the red/green/amber LED control. The manual advises checking and cleaning the flame sensor and checking for proper gas flow.

Likely causes

  1. dirty flame sensor
  2. mislocated flame sensor rod
  3. low gas flow

How to fix it — step by step

  1. Replace the air filter if it is dirty
  2. Turn power off for 30 seconds, then back on, and try one heat call
  3. Do not keep resetting if heating becomes unreliable
  4. Call a technician to clean the flame sensor and check gas flow

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related York furnace problems

See all York furnace codes & guides →