Bosch Dishwasher E15 Error Code
What the E15 code means
The safety switch has detected water in the base of the dishwasher and the leakage protection (AquaStop) system has activated. The machine will not run until the base is dry and any leak is found.
Likely causes
- a leaking hose, seal or component inside the dishwasher
- oversudsing from hand dish soap or too much detergent forcing water into the base
- loose inlet or drain hose connection
How to fix it — step by step
- Turn off the water supply to the dishwasher straight away
- Do not keep resetting and running the machine - Bosch advises contacting support for this code
- Book service to find and fix the leak and dry the base
Parts that commonly fix the E15 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.