Bosch Dryer E03 Error Code

What the E03 code means

The condensation drainage hose is blocked or kinked, so condensed water cannot drain away (condenser and heat-pump models plumbed to a drain). On some older US models E:03 instead means the maximum drying time was exceeded.

Likely causes

  1. Drainage hose kinked or trapped
  2. Hose or siphon spigot blocked with lint or deposits
  3. Hose installed incorrectly

How to fix it — step by step

  1. Switch the dryer off and unplug it
  2. Check the whole condensation drainage hose run for kinks and straighten it
  3. Loosen the hose clip on the siphon, carefully remove the drainage hose, and clean the hose and the siphon spigot, as Bosch instructs
  4. Refit the hose securely, restore power and run a short programme to test
  5. If your model has no drain hose and uses a container, empty the container and clean the fluff filter and condenser instead

Parts that commonly fix the E03 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch dryer error codes

See all Bosch dryer codes & guides →