Bosch Dryer E06 Error Code

What the E06 code means

A fault in the heating circuit — the dryer is not heating correctly. Bosch says this can only be eliminated by an experienced engineer.

Likely causes

  1. Failed heating element
  2. Tripped thermal cut-out / thermostat fault
  3. Wiring or relay fault in the heating circuit
  4. On heat-pump models, a heat-pump circuit fault

How to fix it — step by step

  1. Unplug the dryer and let it cool completely
  2. Clean the fluff filter and, on condenser/heat-pump models, the condenser/heat exchanger, since severe airflow restriction can trip thermal protection
  3. Restore power and try one short timed programme to confirm the code returns
  4. If E06 returns or there is no heat, stop and book an engineer — do not open the dryer to reach the heater or heat-pump circuit

Parts that commonly fix the E06 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch dryer error codes

See all Bosch dryer codes & guides →