Electrolux Washer E42 Error Code
What the E42 code means
Door lock device failure: there is a problem closing or opening the door lock, and the door may stay locked or fail to lock.
Likely causes
- Failed door interlock
- Door lock wiring fault
- Control board fault
How to fix it — step by step
- Wait a few minutes, since the lock releases with a delay after a cycle
- Unplug the washer for 5 minutes and try again
- Do not force the door open
- Book service to test and replace the door lock if needed
Parts that commonly fix the E42 code
- door lock assembly - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.