Electrolux Washer EF0 Error Code
What the EF0 code means
Aqua control / leak warning: the machine has detected water where it should not be, too much foam, or a badly unbalanced load on some models.
Likely causes
- Leak into the base of the machine
- Too much detergent causing excess foam
- Badly unbalanced load
- Blocked or leaking internal hose
How to fix it — step by step
- Turn off the water supply and unplug the washer
- Check the floor and under the machine for water
- If there are lots of suds, use less HE detergent next load and run a rinse
- If EF0 returns with no leak visible, book service to check the base and float
Parts that commonly fix the EF0 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.