Electrolux Washer E35 Error Code
What the E35 code means
Water overfill: the pressure sensor has detected that the water level in the machine has exceeded normal levels.
Likely causes
- Water inlet valve stuck open or faulty
- Leak in the pressure switch hydraulic circuit
- Faulty pressure switch
- Control board fault
How to fix it — step by step
- Turn off the water supply right away
- If the washer fills while unplugged, the inlet valve is stuck and needs replacing
- Let the machine run its safety drain if it starts one
- Book service to test the valve and pressure switch
Parts that commonly fix the E35 code
- water inlet valve - Shop at RepairClinic
- pressure sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.