GE Washer E30 Error Code

What the E30 code means

No drain on GE front-load washers: the control does not detect the drain pump running or the washer cannot drain at all.

Likely causes

  1. Clogged drain pump (large-item) filter
  2. Excess suds blocking drainage
  3. Kinked or blocked drain hose
  4. Failed drain pump

How to fix it — step by step

  1. Unplug the washer
  2. Open the small access door at the bottom front and clean the drain pump filter / large-item trap over a shallow pan
  3. Check the drain hose for kinks and make sure the house drain is clear
  4. Reduce detergent if the load was very sudsy, then retry a Drain & Spin cycle

Parts that commonly fix the E30 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related GE washer error codes

See all GE washer codes & guides →