Lennox Furnace E292 Error Code

What the E292 code means

On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E292 is a Watchguard fault — the indoor blower motor will not start.

Likely causes

  1. Seized or obstructed blower wheel
  2. Failed blower motor
  3. Blower power or communication fault

How to fix it — step by step

  1. Turn power off and check the filter is not collapsed into the blower path
  2. Confirm the breaker is on and the blower door is seated
  3. Reset power once
  4. Call a technician if the blower still will not start — motor replacement is pro work

Parts that commonly fix the E292 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Lennox furnace error codes

See all Lennox furnace codes & guides →