LG Dryer d90 Error Code

What the d90 code means

Flow Sense warning: the dryer's exhaust duct is clogged or restricted by about 90% - a severe restriction that causes long, hot cycles.

Likely causes

  1. Heavy lint buildup in the duct run
  2. Blocked or stuck exterior vent hood flap, or a nest
  3. Crushed transition duct
  4. Very long duct run with multiple elbows

How to fix it — step by step

  1. Stop running heated cycles until the duct is cleared - a restriction this severe is a fire risk
  2. Clean the lint filter and the duct connection behind the dryer
  3. Check the outside vent hood flap opens freely and clear any blockage or nest
  4. Have the entire duct run professionally cleaned, then run a test cycle

Parts that commonly fix the d90 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related LG dryer error codes

See all LG dryer codes & guides →