Maytag Washer F0 E4 Error Code

What the F0 E4 code means

Spin is limited by water temperature: the water is too high in temperature to spin at final speed, so speed is limited to 500 RPM.

Likely causes

  1. Hot and cold hoses reversed
  2. Cold water not reaching the washer for the final rinse
  3. Inlet water temperature sensor fault

How to fix it — step by step

  1. Check the hot hose is on the hot inlet and the cold hose is on the cold inlet
  2. Check the cold faucet is fully open
  3. Run a rinse and spin and check the code clears
  4. If it returns with the hoses correct, call for service for the inlet valve/sensor

Parts that commonly fix the F0 E4 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Maytag washer error codes

See all Maytag washer codes & guides →