Maytag Washer F3 E1 Error Code

What the F3 E1 code means

Water level pressure sensor fault. The control is not getting a correct water level signal.

Likely causes

  1. Air hose between the tub and the pressure switch on the control board loose or damaged
  2. Water level pressure sensor fault on the main control board

How to fix it — step by step

  1. Unplug the washer and disconnect power
  2. Check the air hose connection between the bottom of the tub and the control board in the console
  3. Reconnect or replace a damaged air hose
  4. If the hose is fine, call for service, as the main control board usually needs replacing

Parts that commonly fix the F3 E1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Maytag washer error codes

See all Maytag washer codes & guides →