OBD-II Car P0440 Error Code
What the P0440 code means
Evaporative Emission Control System Malfunction: a general fault in the EVAP system - the sealed plumbing that captures fuel vapours from the tank in a charcoal canister and burns them in the engine instead of venting them. This code says a part of that system (gas cap, canister, purge valve, hoses) is no longer working correctly, without pinpointing which; the more specific EVAP codes P0441-P0456 narrow it down further. There are normally no drivability symptoms.
Likely causes
- Gas cap missing, loose, or no longer sealing
- Failed EVAP purge solenoid
- Plugged or saturated charcoal canister
- Cracked, cut, or disconnected EVAP hose
How to fix it — step by step
- Remove and reinstall the gas cap until it clicks, clear the code, and drive for a day to see whether it returns - always try this first
- Inspect all EVAP hoses and tubes for cuts, cracks, and disconnected fittings, especially around the purge solenoid and canister
- Check the purge valve: it should hold vacuum when unpowered and open when powered - replace it if it leaks through or never opens
- Inspect the charcoal canister for damage or fuel saturation (a strong fuel smell or liquid fuel in the lines means it's done)
- If nothing is obvious, have a shop smoke-test the system - the smoke makes even pinhole leaks visible
Parts that commonly fix the P0440 code
- gas cap - Shop at Amazon
- EVAP purge solenoid - Shop at Amazon
- charcoal canister - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.