OBD-II Car P0700 Error Code
What the P0700 code means
Transmission Control System Malfunction: this is an informational code only. The transmission control module (TCM) has detected a fault in the automatic transmission and stored its own code, and it asked the engine computer to turn on the check engine light - P0700 is just the messenger. It does not tell you what's wrong with the transmission; the real code lives in the TCM and needs a scan tool that can talk to the transmission module. The transmission may also go into a reduced-gear "limp mode" to protect itself.
Likely causes
- A genuine transmission fault stored in the TCM - anything from a shift solenoid or speed sensor to internal wear (this is the overwhelming majority)
- Low or degraded automatic transmission fluid causing the underlying fault
- Failed TCM (possible but uncommon)
- Failed PCM (unlikely)
How to fix it — step by step
- Do not just clear this code - first read the transmission codes from the TCM with a transmission-capable scan tool; a basic engine code reader usually can't, so a parts-store scan or shop visit may be needed
- Check the transmission fluid level (if your car has a dipstick) and its condition - dark, burnt-smelling fluid is evidence, not something to hide with a flush before diagnosis
- Write down the TCM code(s) - they determine the repair, e.g. a solenoid code is very different from a gear-ratio code
- If the scan tool can't communicate with the TCM at all, suspect the TCM or its power/ground feeds
- Take the car and the TCM codes to a transmission specialist - internal transmission diagnosis and repair is not a driveway job
Parts that commonly fix the P0700 code
- transmission control module - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.