OBD-II Car P0304 Error Code

What the P0304 code means

Cylinder 4 Misfire Detected: the engine computer has determined cylinder #4 is not firing properly. As with the other P030x codes, isolate the cause with swap tests - ignition parts first, then the injector, then compression - instead of replacing parts on suspicion.

Likely causes

  1. Worn or fouled spark plug, or damaged plug wire/boot on cylinder 4
  2. Failed ignition coil for cylinder 4
  3. Clogged or failed fuel injector for cylinder 4
  4. Vacuum leak near cylinder 4's intake port
  5. Low compression on cylinder 4 - burned exhaust valve or worn rings (test last)

How to fix it — step by step

  1. Remove and inspect cylinder 4's spark plug; replace plugs if worn, incorrectly gapped, or overdue
  2. Swap cylinder 4's ignition coil with a known-good cylinder's coil, clear codes, and drive - if the misfire code changes to that cylinder, replace the coil
  3. If spark is strong, test the cylinder 4 fuel injector (swap test or noid-light check for pulse)
  4. Inspect for vacuum leaks around the intake runner for cylinder 4
  5. Compression-test cylinder 4 if the above all pass - low or uneven compression indicates internal engine damage

Parts that commonly fix the P0304 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related OBD-II car error codes

See all OBD-II car codes & guides →