Payne Furnace 27 Error Code

What the 27 code means

Super plug program fault on Payne furnaces with a 3-digit status display. The program in the super plug is missing, not recognized, or corrupted (minor codes 27.1 through 27.3), so the control cannot run its heating program.

Likely causes

  1. Super plug missing
  2. Super plug program not recognized or corrupted

How to fix it — step by step

  1. Note the code for the technician
  2. Do not remove or swap plugs inside the control yourself
  3. Leave the furnace off if it will not run
  4. Call a technician - the control must be reprogrammed or the super plug replaced by a dealer

Parts that commonly fix the 27 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Payne furnace error codes

See all Payne furnace codes & guides →