Payne Furnace 43 Error Code
What the 43 code means
Low-heat pressure switch open while the high-heat pressure switch is closed, on the Payne PG96VTA two-stage furnace - a contradictory pressure switch state.
Likely causes
- Low-heat pressure switch stuck open
- Disconnected or obstructed pressure tubing
- Mis-wired pressure switches
- Plugged condensate drain
- Low inlet gas pressure (if a low gas pressure switch is fitted)
How to fix it — step by step
- Check the condensate drain line and trap for a clog or standing water
- Check outdoor vent terminations for blockage
- Note the code for the technician
- Call a technician - pressure switch wiring is a professional diagnostic; never jumper a pressure switch
Parts that commonly fix the 43 code
- pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.