Raypak Pool heater Sensor Failure
What this problem usually means
On Raypak Digital gas pool heaters (206A-406A), Sensor Failure means the heater's two temperature thermistors disagree by more than 2F, so the control cannot trust the water temperature reading.
Likely causes
- drifting or failed thermistor
- damaged sensor wiring
- corroded sensor connector at the board
How to fix it — step by step
- Turn power to the heater off at the breaker
- Note the exact message for the technician
- Do not bypass the sensor
- Call a pool technician to test the thermistors and wiring and replace the sensor if needed
Parts that commonly fix it
- temperature sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.