Rheem Furnace 61 Error Code

What the 61 code means

Blower fault — blower unable to run — on Rheem furnaces with the 7-segment diagnostic display. The control declared a non-operational (dead) blower, which can also appear with code 22 when the main limit stays open.

Likely causes

  1. failed blower motor
  2. blower wheel failure
  3. blower control or wiring fault

How to fix it — step by step

  1. Replace the air filter if it is dirty
  2. Open all registers and clear blocked returns
  3. Turn power off for 30 seconds, then back on, and try one heat call
  4. If the blower still does not run, call a technician — motor replacement is pro work

Parts that commonly fix the 61 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Rheem furnace error codes

See all Rheem furnace codes & guides →