Samsung Dishwasher HC Error Code

What the HC code means

High temperature heater error: the temperature inside the dishwasher is too hot. On rotary models this same fault can appear as 1E or IE.

Likely causes

  1. Heater overheating or stuck on
  2. Thermistor reading incorrectly
  3. Excessively hot inlet water
  4. Control board relay fault

How to fix it — step by step

  1. Switch power off at the breaker for 30 seconds, then back on
  2. Empty the dishwasher, fill the detergent drawer and start a Normal cycle
  3. Check inlet water is not excessively hot and filters are clean
  4. If the code returns, request service

Parts that commonly fix the HC code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung dishwasher error codes

See all Samsung dishwasher codes & guides →