Samsung Washer 5E Error Code
What the 5E code means
Water is not draining from the washer, or is draining too slowly. This is the older display form of the newer 5C code (also shown as nd or SE on some models).
Likely causes
- Clogged debris / pump filter
- Kinked, clogged or frozen drain hose
- Drain hose installed too low, too high or pushed too far into the standpipe
- Object lodged in the drain pump
- Failed drain pump
How to fix it — step by step
- Unplug the washer and, on front-load models, drain via the emergency hose and clean the debris filter
- Check the drain hose for kinks and blockages and straighten it to the drain
- Make sure the drain hose is at the correct height and not sealed airtight in the standpipe
- Remove any coins, lint or small items found in the filter housing
- Plug back in and run a spin cycle to drain remaining water
Parts that commonly fix the 5E code
- drain pump - Shop at RepairClinic
- drain hose - Shop at RepairClinic
- debris filter - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.