Samsung Washer UC Error Code

What the UC code means

Fluctuation in the supply voltage detected. Samsung says to check the cord is plugged in properly and that the washer is not on an extension cable or shared with other apparatus.

Likely causes

  1. Irregular or low supply voltage
  2. Washer on a shared circuit or extension cord
  3. Power outage / breaker trip during a cycle (PF)
  4. Washer used on a power grid it was not made for

How to fix it — step by step

  1. Plug the washer directly into its own wall outlet - do not use an extension cord
  2. Check the breaker has not tripped and reset it if needed
  3. Unplug for 1 minute, restore power and start a new programme
  4. Check the power cord is plugged in properly

Parts that commonly fix the UC code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →