Whirlpool Dryer F3 E2 Error Code
What the F3 E2 code means
Moisture sensor failure: the control is not getting a proper signal from the moisture sensor bars inside the drum.
Likely causes
- Residue build-up on the moisture sensor strips
- Metal object shorted across the two sensor bars
- Loose or damaged moisture sensor wire harness
- Dryer not level so clothes do not contact the sensor strips
How to fix it — step by step
- Clean residue off the moisture sensor strips inside the drum
- Remove any metal object touching both sensor bars
- Level the dryer so garments tumble against the sensor strips
- Unplug for 1 minute and retry; if the code returns, the harness or control may need service
Parts that commonly fix the F3 E2 code
- moisture sensor wire harness - Shop at RepairClinic
- electronic control board - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.