Whirlpool Washer FH Error Code
What the FH code means
Water inlet problem: no water is detected entering the machine, or the pressure switch trip was not detected.
Likely causes
- Water faucets not turned on fully
- Plugged or kinked inlet hoses
- Clogged inlet valve screens
- Failed water inlet valve
- Pressure switch hose or drain pump problem if water is present
How to fix it — step by step
- Press Pause/Cancel twice to clear the code
- Unplug the washer and check both faucets are fully on
- Check inlet hoses for kinks and clean the inlet screens
- Plug in, reselect the cycle and press Hold to Start
- If water is in the tub but the code returns, call for service
Parts that commonly fix the FH code
- water inlet valve - Shop at RepairClinic
- pressure switch - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.