Bosch Washer E23 Error Code

What the E23 code means

The AquaStop leak-protection system has been activated, which usually means water has leaked into the base of the washer. Bosch states this fault cannot be rectified by the user.

Likely causes

  1. Leaking inlet or AquaStop hose
  2. Leaking door seal
  3. Leaking drain pump or internal hose
  4. Overfilling from a faulty inlet valve

How to fix it — step by step

  1. Turn off the water tap immediately
  2. Unplug the washer and do not run it again until it has been checked
  3. Mop up any water on the floor and check the visible hose connections at the back for drips
  4. Book a technician to find and repair the leak

Parts that commonly fix the E23 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch washer error codes

See all Bosch washer codes & guides →