Bosch Washer E29 Error Code

What the E29 code means

Too little water is reaching the washer — Bosch groups E29/F29 with its water-inlet faults: the inlet or AquaStop filters are blocked or the water pressure is too low. It is also shown as E00-29 on three-digit displays.

Likely causes

  1. Water tap turned off or only partly open
  2. Blocked filter in the inlet hose or AquaStop hose connection
  3. Water pressure too low (Bosch expects roughly 10 litres / 2.5 gallons per minute from a fully open tap)
  4. Kinked inlet hose
  5. Faulty water inlet valve

How to fix it — step by step

  1. Make sure the tap is fully open
  2. Check the inlet hose is not kinked or trapped
  3. Turn off the tap, unplug the washer, and clean the filter screens in the hose connections (do not immerse an AquaStop hose — it contains an electric valve)
  4. Test the tap flow into a bucket — about 10 litres should flow in a minute; if it is much less, the supply is the problem
  5. Reconnect, restore power and water, and retest with a short programme

Parts that commonly fix the E29 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch washer error codes

See all Bosch washer codes & guides →