Bosch Washer E:35 -10 Error Code
What the E:35 -10 code means
The appliance is leaking — there is water in the base trough and the leak protection has stopped the machine. On some models this alternates with E:23.
Likely causes
- Leaking door seal
- Leaking inlet or drain hose connection
- Leaking drain pump or internal hose
- Overfilling from a faulty inlet valve
How to fix it — step by step
- Turn off the water tap immediately, as the Bosch manual instructs
- Unplug the washer and mop up any water on the floor
- Check the visible hose connections at the back and the door seal for drips or splits
- Call Bosch after-sales service or a technician — the leak source is usually internal
Parts that commonly fix the E:35 -10 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.