Bosch Washer E19 Error Code

What the E19 code means

The water heating time has been exceeded — the washer could not heat the water to the set temperature in the allowed time. Bosch states this fault cannot be rectified by the user.

Likely causes

  1. Failed heating element
  2. Limescale build-up on the heating element
  3. Faulty temperature (NTC) sensor
  4. Low supply voltage

How to fix it — step by step

  1. Unplug the washer and leave it unplugged — do not open the machine to reach the heater
  2. Try one reset: restore power after a few minutes and run a hot programme once to confirm the code returns
  3. If E19 returns, stop using the washer and book a technician

Parts that commonly fix the E19 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch washer error codes

See all Bosch washer codes & guides →