Bosch Washer E18 Error Code
What the E18 code means
The washer is not draining — Bosch lists a blocked drain pump, a blocked or kinked drain hose, or oversudsing as the causes. It is also shown as F18 or d02 on some models.
Likely causes
- Drain pump filter blocked with coins, lint or debris
- Drain hose kinked or blocked
- Drain hose installed too high (over about 1 metre) or with an unapproved extension
- Pump cover not screwed in correctly
- Too much detergent causing excess foam
- Failed drain pump
How to fix it — step by step
- Switch the programme off, unplug the washer and close the water supply
- Check the drain hose for kinks and make sure it is installed no higher than about 1 metre
- Open the service flap, drain the remaining water into a shallow pan, unscrew the pump cover and clean the pump filter, checking the impeller turns freely
- Refit the pump cover firmly, pour about 1 litre of water into the detergent drawer to check for leaks, then run the Drain programme
- If you oversudsed, reduce the detergent dose on the next wash
Parts that commonly fix the E18 code
- drain pump - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.