Goodman Furnace 10 flashes

What this problem usually means

Open fuse on Goodman GMES96-series furnaces. The low-voltage fuse on the control board has opened, usually because of a short in the low-voltage wiring.

Likely causes

  1. blown control board fuse
  2. short in thermostat or low-voltage wiring
  3. shorted component in the control circuit

How to fix it — step by step

  1. Turn the thermostat to Off
  2. Check the furnace power switch and breaker are on
  3. Do not repeatedly replace the fuse — a repeat blow means a short
  4. Call a licensed HVAC technician to find the short and replace the fuse

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Goodman furnace problems

See all Goodman furnace codes & guides →