Goodman Furnace 12 flashes
What this problem usually means
Inducer relay error or improper grounding on Goodman GMES96-series furnaces. The control cannot run the inducer relay correctly or detects a grounding problem.
Likely causes
- failed inducer relay on the control board
- poor or missing furnace ground
- faulty inducer motor circuit
How to fix it — step by step
- Check the thermostat is set to Heat and calling for heat
- Check the outdoor vent and intake pipes are clear of snow, ice or debris
- On a high-efficiency model, check the condensate drain line and trap are not clogged or frozen
- Turn power off at the furnace switch for 30 seconds, then back on, and try one heat call
- If the code returns, stop resetting and call a licensed HVAC technician
Parts that commonly fix it
- control board - Shop at RepairClinic
- inducer motor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.