iRobot Robot vacuum Error 12
What this problem usually means
Drop-off detected: the cliff sensors are reporting a drop, so Roomba has stopped and needs to be moved to a new area.
Likely causes
- Dirty or obstructed cliff sensors
- Robot at the edge of a drop-off
- Dark surface triggering the cliff sensors
How to fix it — step by step
- Move Roomba to a new area on flat ground
- Wipe the cliff sensor windows underneath the robot clean
- Check the robot is not perched on an obstacle or threshold
- Press CLEAN to restart
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.