iRobot Robot vacuum Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 39 problems covered.
Shop iRobot Robot vacuum parts at RepairClinic
- Charging Error 1 — A charging error, separate from cleaning Error 1: Roomba does not detect a battery. iRobot says to check the battery is installed and to…
- Charging Error 2 — A charging error, separate from cleaning Error 2: an over-current charge fault has been detected. iRobot says to confirm you are using an…
- Charging Error 6 — A charging error, grouped by iRobot with Charging Error 7: Roomba's battery is either too warm or too cold for charging, so charging has…
- Charging Error 9 — A charging error, separate from cleaning Error 9: a battery failure has been detected and the battery may need to be replaced.
- Error 1 — Uneven ground: Roomba is on an obstacle or uneven surface and its left wheel is hanging down or stuck. On 600 series robots the same…
- Error 10 — A wheel problem: the right wheel encoder is not registering, or the right wheel is on the ground but the robot cannot sense it. On 600…
- Error 11 — Vacuum problem: the vacuum motor is not activating.
- Error 12 — Drop-off detected: the cliff sensors are reporting a drop, so Roomba has stopped and needs to be moved to a new area.
- Error 13 — Uneven ground: both wheels are on an uneven surface, so Roomba cannot start or continue cleaning.
- Error 14 — Roomba is not detecting an installed bin. The bin may be missing or not seated, the filter may not be installed in the bin, or the bin…
- Error 15 — An internal error: the s series chart calls it an internal navigation error and the j and i series charts call it an internal board error.
- Error 16 — Roomba was bumped as it started, causing a gyro error. The bumper may also be dislodged.
- Error 17 — Roomba cannot complete and has canceled its cleaning job. It is a navigation and localization failure: the robot got lost, ended its…
- Error 18 — Docking problem: Roomba cannot return to the Home Base or starting position to charge. Older series announce this as error one-eight (1-8).
- Error 19 — Undocking problem: Roomba failed to undock from the Home Base. It may have bumped something near the Home Base as it tried to leave.
- Error 2 — The main brushes cannot turn. On i, j and s series robots this is the multi-surface rubber brushes; on older series it is the main brushes…
- Error 20 — Roomba is experiencing an internal communication error. This code appears on the i series chart and is not listed on the s or j series…
- Error 21 — Roomba has lost communication with its mobility board, an internal communication error.
- Error 22 — Roomba is stuck in its surroundings and needs to be moved to a new area.
- Error 23 — Battery authentication failure: Roomba cannot verify that its battery is a genuine iRobot battery.
- Error 24 — Roomba needs to be placed on a flat surface: it is on an uneven surface or its wheels are not registering the floor correctly.
- Error 25 — An internal board or internal communication error. iRobot's documented first fix is to reboot the robot.
- Error 26 — Vacuum stall: the vacuum stalled during the job, most likely because the filter is clogged and airflow through the bin is restricted.
- Error 27 — Vacuum motor over-temperature: the vacuum motor has overheated, caused by a clogged filter or a bad impeller in the vacuum motor.
- Error 29 — An error occurred while Roomba was upgrading its software.
- Error 3 — Uneven ground: Roomba is on an obstacle or uneven surface and its right wheel is hanging down or stuck.
- Error 30 — Vacuum problem: the vacuum failed to start.
- Error 31 — An internal board error, listed on the s series chart. iRobot's instruction is to press CLEAN to restart.
- Error 32 — The Smart Map version on the robot does not match the map saved in the app.
- Error 33 — Roomba is unable to clean the path detailed in its Smart Map because the path may be blocked.
- Error 34 — An internal communications error inside the robot. iRobot's documented fix is to reboot the robot.
- Error 36 — Empty the bin: the bin full sensor was not cleared when the debris was evacuated, so Roomba still thinks the bin is full.
- Error 4 — Left wheel drive stall: the left wheel is jammed and cannot turn.
- Error 41 — The cleaning mission timed out before completion, so Roomba stopped the job.
- Error 5 — Right wheel drive stall: the right wheel is jammed and cannot turn. On 600 series robots Roomba says to spin its side wheels to clean them.
- Error 6 — A drop-off is constantly detected: Roomba keeps seeing a cliff and will not move. The cliff sensors may be dirty, the robot may be hanging…
- Error 7 — A wheel problem: on s series the left wheel encoder is not registering; on j series the side wheels cannot turn, usually because the robot…
- Error 8 — Vacuum problem: the vacuum has poor suction.
- Error 9 — Constant bump: the bumper is jammed with debris or dislodged, so Roomba reads it as permanently pressed. On 600 series robots the bumper…