iRobot Robot vacuum Error 9
What this problem usually means
Constant bump: the bumper is jammed with debris or dislodged, so Roomba reads it as permanently pressed. On 600 series robots the bumper may be compressed or its sensor dirty.
Likely causes
- Debris jammed in or behind the bumper
- Bumper dislodged
- Dirty bumper sensor
How to fix it — step by step
- Tap the bumper repeatedly to unstick it
- Check around and behind the bumper and remove any trapped debris
- Confirm the bumper clicks in and out freely on both sides
- Press CLEAN to restart
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.