iRobot Robot vacuum Error 6

What this problem usually means

A drop-off is constantly detected: Roomba keeps seeing a cliff and will not move. The cliff sensors may be dirty, the robot may be hanging over a drop, or it may be on a dark surface.

Likely causes

  1. Dirty cliff sensors
  2. Robot stuck hanging over a cliff or ledge
  3. Very dark floor surface fooling the cliff sensors

How to fix it — step by step

  1. Move Roomba to a new, flat area away from any drop-off
  2. Wipe the cliff sensor windows underneath the robot clean of dust and debris
  3. Check the robot is not stuck on an obstacle
  4. Press CLEAN to restart

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →