iRobot Robot vacuum Error 2
What this problem usually means
The main brushes cannot turn. On i, j and s series robots this is the multi-surface rubber brushes; on older series it is the main brushes or debris extractors.
Likely causes
- Hair or debris wrapped around the brushes or their ends
- Brushes jammed or not seated correctly
- Thick carpet stalling the brushes
How to fix it — step by step
- Open the brush cage and remove the brushes or extractors
- Clear hair and debris from the brushes, their ends and bearings
- Reinstall the brushes and close the cage
- Test on a hard floor if it happened on thick carpet, then press CLEAN to restart
Parts that commonly fix it
- extractors - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.