iRobot Robot vacuum Error 31

What this problem usually means

An internal board error, listed on the s series chart. iRobot's instruction is to press CLEAN to restart.

Likely causes

  1. Temporary internal board fault
  2. Internal communication glitch that clears on restart

How to fix it — step by step

  1. Press CLEAN to restart the job
  2. Reboot the robot if the error comes back
  3. Run a short test job to confirm it has cleared
  4. Contact iRobot Customer Care if it repeats after rebooting

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →