Lennox Furnace E250 Error Code

What the E250 code means

On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E250 means the primary limit switch is open — the furnace overheated, almost always an airflow problem first. If it stays open 3 minutes the furnace enters a 60-minute Watchguard.

Likely causes

  1. Dirty air filter
  2. Closed registers or blocked returns
  3. Failing blower motor
  4. Failed limit switch

How to fix it — step by step

  1. Turn the thermostat down and let the furnace cool
  2. Replace the air filter
  3. Open all supply registers and clear blocked returns
  4. Call for heat once after cooling; if E250 returns, call a technician

Parts that commonly fix the E250 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Lennox furnace error codes

See all Lennox furnace codes & guides →