LG Dryer d80 Error Code
What the d80 code means
Flow Sense warning: the dryer's exhaust duct is clogged or restricted by about 80%. On gas dryers, d80 can also indicate a lack of gas supplied to the unit.
Likely causes
- Lint buildup restricting the exhaust duct
- Crushed or kinked duct behind the dryer
- Blocked exterior vent hood
- On gas models, gas supply turned off or not reaching the dryer
How to fix it — step by step
- Clean the lint filter
- Inspect the whole exhaust duct for crushing, kinks or damage and clear lint buildup at the rear exhaust
- Check outside while the dryer runs to confirm air is blowing out of the vent
- On a gas dryer, confirm the gas supply valve is on
- Arrange professional vent cleaning if the run is long or the code returns
Parts that commonly fix the d80 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.